Home Posts tagged "Batting"

6 Physical Attributes of Elite Hitters

After reading Bobby Tewksbary's great resource, Elite Swing Mechanics, I've been thinking about the characteristics of elite hitters. Just as Bobby breaks down swing mechanics to identify growth areas, I'm always looking to find physical limitations that might interfere with an athlete's ability to best "acquire" the swing mechanics guys like Bobby are seeking. Here are six physical attributes I've noticed in most elite hitters.

1. Sufficient Hip Mobility

You don't have to look any further than the rise in hip injuries over the past decade to recognize just how aggressive the hip rotation is during the baseball swing. In particular, it's essential for hitters to have sufficient hip internal rotation and extension. Unfortunately, these ranges of motion are usually the first to go in the dysfunctional lumbopelvic (hip/lower back) postural presentations we see. As the pelvis dumps forward into anterior tilt, it blocks off internal rotation - and the athlete will preferentially extend through the lower back instead of the hip.

APT-250x300

This leads to not only limited hip function, but also an increased risk of injury. The athlete may develop bony overgrowth (femoroacetabular impingement; read more here) on the head of the femur or the hip socket, a torn labrum, a sports hernia, or a number of other hip issues. There may also be extension-based lower back pain, including stress fractures and disc injuries. This loss in hip motion is generally related to point #2...

2. Sufficient Core Control

Many of the hip mobility restrictions we see in these athletes aren't just because muscles are actually short, or bony blocks have developed to restrict range of motion. Rather, they may be in place because the athlete's core control is so out-of-whack that alignment issues actually limit range of motion. Imagine driving a car that's out of alignment; turning to one side will ultimately wind up being more difficult. The good news about this scenario is that it's often possible to get quick changes in an athlete's hip mobility just by modifying posture, incorporating positional breathing, and doing a bit of activation work. I've seen athletes gain more than 30 degrees of hip internal rotation in a matter of 30 seconds without manual therapy or stretching, so adding some core control in the right places can definitely be a powerful thing.

Remember, the research clearly demonstrates that the core works to transfer - not develop - force during the baseball swing. Its job is to take the force developed in the lower extremity and make sure that it is delivered to the upper extremity and, ultimately, the bat. This function should be reflected in the exercise selection we use, as we gravitate toward rotational medicine ball variations and chops/lifts rather than sit-ups, crunches, and side bends.

3. Sufficient Thoracic (Upper Back) Mobility

One of the key points Bobby made in his article earlier this week was that Pujols - like all elite hitters - gets his hips moving forward while his hands are still held back and up (and actually moving further back and up). To do this, you need three things. We've covered the first two: hip mobility and core stability. However, you also need sufficient mobility through your upper back to allow this "separation" to occur. Even if the hip and core components are ideal, if the upper back isn't sufficiently mobile, the hands can't stay back to allow a) force transfer without "energy leaks" and b) the right timing for this transfer. As Bobby also noted, if the hands can't stay back long enough, the hitter has less time to see and react/adjust to the pitch that's thrown. In short, a physical limitation can quickly become a mechanical issue. I should note that while thoracic rotation (transverse plane) is predominantly what we're seeking, you can't have sufficient rotation if you're stuck in a rounded upper back posture (flexion/sagittal plane). If you look like this, you'll need to get your extension back to help unlock the rotation you seek.

RoundBackFS-300x225

4. The Ability to Hip Hinge

This point really goes hand-in-hand with #1 from above, but I think it's important to distinguish the hip hinge (hip flexion with a neutral spine) as pre-loading, whereas the extension and internal rotation that takes place is actually unloading. In other words, the former stores the elastic energy we need, while the latter releases it over a sufficient range of motion. Candidly, I'm shocked at how many young athletes have lost the ability to hip hinge correctly. You'll see it quite a bit in more advanced hitters as well, and they're usually the higher-level guys who have hip and lower back problems. If you can't effectively pre- load your hips, you'll have to go elsewhere to get your power - or you just won't create it. A detailed review of what a good hip hinge is and how to train for it could be (and is) a full-day seminar. Basically, this is as much a stability limitation and patterning problem as it is an actual flexibility deficit. Put these three components together, and you have your "mobility" potential.

Without getting too sidetracked, here's a quick rule with respect to the hip hinge: players need to be able to touch their toes without a huge knee bend (greater than 30 degrees) or hyperextension of the knees.

photo-68-e1406897769681

Sure, we need to consider how much posterior hip shift there is, whether they can reverse the lumbar curve, and whether they return from the toe touch with predominantly hip or lower back motion, but I think the quick screening rule from above is a good place to start.

5. Lower Body Strength/Power

You don't have to be an elite powerlifter or Olympic lifter to hit home runs. However, you do need enough strength and - just as importantly - the ability to display that force quickly. On the strength side, I seriously doubt you'll find many hitters in the big leagues who aren't capable of deadlifting at least 1.5 times their body weight, and if you do find some, they're probably guys who have been around for quite some time and gotten much more efficient with their patterning to use every bit of force they have in the tank. Or, they're just carrying too much body fat. On the power side, it's not good enough to just be a weight room rockstar. It's also important to be able to take that strength and apply it quickly in more sport-specific contexts with drills like rotational medicine ball throws, sprinting, jumping and, of course, hitting and throwing. Once you've got the foundation of strength, your power training can really take off - and that includes your swing mechanics. Until you're able to put more force into the ground, it's going to be difficult to generate more bat speed unless you have glaring deficiencies in your swing mechanics that can be cleaned up.

hiprotation

6. Great Sports Vision

You can't hit what you can't see - and elite hitters almost always have elite vision. Some of this is outside your control, but I always encourage all our baseball guys to get thorough yearly eye exams. I'm a bit biased because my wife is an optometrist, but I've seen players for whom vision corrections with contact lenses and glasses has been a complete game-changer.

Wrap-up

This is certainly not an exhaustive list of physical attributes of high-level hitters, but it's a good start. Building on this point, as examples, you'll notice I didn't say "tremendous forearm strength" or "a huge bench press." Some guys might have these "proficiencies," but that doesn't mean they're absolutely essential for high-level hitting. Many hitters might develop appreciable forearm strength from the act of hitting over many years, but that doesn't mean they had to specifically train it to make that advancement. And, on the bench press front, there may be guys who've trained the bench press heavily, but never recognized that it might not have had much of an impact on their hitting performance. This is why we have to look at the big picture and see what ALL elite hitters are doing to be successful.

If you're looking to learn more about the technical aspects of hitting that go hand-in-hand with these points, be sure to check out Bobby's Elite Swing Mechanics e-book. I highly recommend it - especially at such a great price. 

Sign-up Today for our FREE Baseball Newsletter and Receive Instant Access to a 47-minute Presentation from Eric Cressey on Individualizing the Management of Overhead Athletes!

Name
Email
Read more

Oblique Strains and Rotational Power

On Monday night, Josh Hamilton put on an amazing show with 28 homeruns in the first round of the MLB Homerun Derby. While he went on to lose to Justin Morneau in the finals of the contest, Hamilton did smash four 500+ ft. shots - and stole the hearts of a lot of New York fans. It's an incredible story; Hamilton has bounced back from eight trips to rehabilitation for drugs and alcohol to get to where he is today.

Geek that I am, though, I spent much of the time focusing on the incredible hip rotation and power these guys display on every swing. According to previous research, the rotational position of the lead leg changes a ton from foot off to ball contact. After hitting a maximal external rotation of 28° during the foot off “coiling” that takes place, those hips go through some violent internal rotation as the front leg gets stiff to serve as a “block” over which crazy rotational velocities are applied.

How crazy are we talking? How about 714°/s at the hips? This research on minor leaguers also showed that stride length averaged 85cm - or roughly 380% of hip width. So, you need some pretty crazy abduction and internal rotation range-of-motion (ROM) to stay healthy. And, of course, you need some awesome deceleration strength – and plenty of ROM in which to apply it – to finish like this.

Meanwhile, players are dealing with a maximum shoulder and arm segment rotational velocities of 937°/s and 1160°/s, respectively. All of this happens within a matter of 0.57 seconds. Yes, about a half a second.

These numbers in themselves are pretty astounding – and probably rivaled only by the crazy stuff that pitchers encounter on each throw. All these athletes face comparable demands, though, in the sense that these motions take a tremendous timing to sequence optimally. In particular, in both the hitting and pitching motions, the hip segment begins counterclockwise (forward) movement before the shoulder segment (which is still in the cocking/coiling phase). Check out this photo of Tim Hudson (more on this later):

Many of you have probably heard about a “new” injury in major league baseball – oblique strains – which have left a lot of people looking for answers. In fact, the USA Today published a great article on this exact topic earlier this season. Guys like Hudson, Chris Young, Manny Ramirez, Albert Pujols, Chipper Jones and Carlos Beltran (among others) have dealt with this painful injury in recent years. You know the best line in this entire article? With respect to Hudson:

“After the 2005 season, he stopped doing core work and hasn't had a problem. Could that be the solution?”

I happen to agree with the mindset that some core work actually contributes to the dysfunction – and the answer (to me, at least) rests with where the injury is occurring: “always on the opposite side of their throwing arm and often with the muscle detaching from the 11th rib.” If I’m a right-handed pitcher (or hitter) and my left hip is already going into counter-clockwise movement as my upper body is still cocking/coiling in clockwise motion – both with some crazy rotational velocities – it makes sense that the area that is stretched the most is going to be affected if I’m lacking in ROM at the hips or thoracic spine.

I touched on the need for hip rotation ROM, but the thoracic spine component ties right into the “core work” issue. Think about it this way: if I do thousands of crunches and/or sit-ups over the course of my career – and the attachment points of the rectus abdominus (“abs”) are on the rib cage and pelvis – won’t I just be pulling that rib cage down with chronic shortening of the rectus, thus reducing my thoracic spine ROM in the process?

Go take another look at the picture of Tim Hudson above. If he lacks thoracic spine ROM, he’s either going to jack his lower back into lumbar hyperextension and rotation as he tries to “lay back” during the late cocking phase, or he’s just going to strain an oblique. It’s going to be even worse if he has poor hip mobility and poor rotary stability – or the ability to resist rotation where you don’t want it.

Now, I’m going to take another bold statement – but first some quick background information:

1. Approximately 50-55% of pitching velocity comes from the lower extremity.

2. Upper extremity EMG activity during the baseball swing is nothing compared to what goes on in the lower body. In fact, Shaffer et al. commented, “The relatively low level of activity in the four scapulohumeral muscles tested indicated that emphasis should be placed on the trunk and hip muscles for a batter's strengthening program.”

So, the legs are really important; that 714°/s at the hips has to come from somewhere. And, more importantly, it’s my firm belief that it has to stay within a reasonable range of the shoulder and arm segment rotational velocities of 937°/s and 1160°/s (respectively). So, what happens when we give a professional baseball player a foo-foo training program that does little to build or even maintain lower-body strength and power? And, what happens when we have that player run miles at a time to “build up leg strength?” How many marathoners do you know who throw 95mph and need those kind of rotational velocities or ranges of motion? Apparently, bigger contracts equate to weaker, tighter legs…

Meanwhile, guys receive elaborate throwing programs to condition their arms – and they obviously never miss an upper-body day (also known as a “beach workout"). However, the lower-body is never brought up to snuff – and it lags off even more in-season when lifting frequency is lower and guys do all sorts of running to “flush their muscles.” The end result is that the difference between 714°/s (hips) and 937°/s and 1160°/s (shoulders and arms) gets bigger and bigger. Guys also lose lead-leg hip internal rotation over the course of the season if they aren’t diligent with their hip mobility work.

So, in my opinion, here’s what we need to do avoid these issues:

1. Optimize hip mobility – particularly with respect to hip internal rotation and extension. It is also extremely important to realize the effect that poor ankle mobility has on hip mobility; you need to have both, so don’t just stretch your hip muscles and then walk around in giant high-tops with big heel-lifts all day.

2. Improve thoracic spine range of motion into extension and rotation.

3. Get rid of the conventional “ab training/core work” and any yoga or stretching positions that involve lumbar rotation or hyperextension and instead focus exclusively on optimizing rotary stability and the ability to isometrically resist lumbar hyperextension.

4. Get guys strong in the lower body, not just the upper body.

5. Don’t overlook the importance of reactive work both in the lower and upper-body. I’ve read estimates that approximately 25-30% of velocity comes from elastic energy. So, sprint, jump, and throw the medicine balls.

Sign-up Today for our FREE Baseball Newsletter and Receive a 47-Minute Presentation on Individualizing the Management of Overhead Athletes!

Name
Email

Read more
Page
LEARN HOW TO DEADLIFT
  • Avoid the most common deadlifting mistakes
  • 9 - minute instructional video
  • 3 part follow up series